Still Image Recording

ENGLISH

✤Still image recording works only in <Camera> mode. ➥page 19

✤A tape must be inserted as Still Images are recorded on a tape.

1.Set the [Power] switch to [CAMERA].

2.Set the [Mode] switch to [TAPE].

3.Press the [PHOTO] button.

■ The still image is recorded for about 6~7 seconds.

4.After the still image has been recorded, the Camcorder returns to its previous mode.

Searching for a still image

✤The Photo Search works only in <Player> mode. ➥page 19

1.	Set the [Power] switch to [PLAYER].
2.	Set the [Mode] switch to [TAPE].
3.	Press the [MENU] button.
	■	The menu list will appear.
4.	Move the [Zoom] lever up or down to select <Tape>, then
	press the [OK] button.
5.	Move the [Zoom] lever up or down to select
	<Photo Search>, then press the [OK] button.
	■	œœ/√√ will flash on the LCD.	6
6.	Press the [œœ/√√ (REV/FF)] buttons to search the still		6

image.

■The photo search process appears while you are searching.

■After completing the search, the Camcorder displays the still image.

■When there are no still images recorded on the tape, it will be fully rewound or forwarded.

7.To exit, press the [■ (STOP)] or [MENU] button.

[ Notes ]

■	Still image recording is not available while recording.
■	You can use still image recording by using the [PHOTO] button
	on the remote control. Pressing the [PHOTO] button on the
	remote control records the still image at once with automatic
	focusing.