Samsung VP-D964Wi Troubleshooting

9999
ENGLISH
Troubleshooting
Troubleshooting
✤Before contacting a Samsung authorized service centre, perform the
following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Moisture Condensation
■
If the Camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the Camcorder,
on the surface of the tape, or on the lens. In this condition, the tape
may stick to the head drum and be damaged or the unit may not
operate correctly.
To prevent possible damage under these circumstances, the
Camcorder is fitted with a moisture sensor.
■
If there is moisture inside the Camcorder, (DEW) is displayed. If
this happens, none of the functions except cassette ejection will
work.
Open the cassette compartment and remove the Battery.
Leave the Camcorder for at least two hours in a dry warm room.
✤
■
,
LENS ,
,
■
(DEW)
slow
slow
no
slow
slow
slow
slow
The Battery pack is almost discharged. Change to a charged one.
When the remaining time on the
tape is about 2 minutes. Prepare a new one.
T he tape reached its end. Change to a new one.
T here is no tape in Camcorder. Insert a tape.
T he tape is protected from recording. If you want to record,
release the protection.
Moisture condensation has formed
in the Camcorder. see below.
T he Camcorder has some
mechanical fault. 1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your local
Samsung service centre.
Tape end!
Tape end!
No Tape!
Protection!
....D
L
C
R
Display Blinking Informs that... Action
.
2
.
..
.
.
1. .
2.
3. .
4. .
....D
L
C
R
Tape end!
!)
Tape end!
!)
No Tape!
)
Protection!
!)
...