Samsung VP-D964Wi Connecting to a TV which has no Audio/Video Input Jacks, With the Multi Cable

ENGLISH

Playback

Connecting to a TV which has no Audio/Video Input Jacks

✤You can connect your Camcorder to a TV through a VCR.

1.	Connect the Camcorder to your VCR		VCR
	with the Multi Cable.
	■	The yellow jack: Video
	■	The white jack: Audio(L) - Mono
	■	The red jack: Audio(R)
2.	Connect a TV to the VCR.
3.	Set the [Power] switch to [PLAYER].		TV
4.	Set the [Mode] switch to [TAPE].
5.	Turn on both the TV and VCR.
	■	Set the input selector on the VCR to
		Line.	Antenna

■Select the channel reserved for your VCR on the TV set.

6.Play the tape.

Playback

1. Connect a power source and set the [Power] switch to [PLAYER].

2. Set the [Mode] switch to [TAPE].

3. Insert the tape you wish to play back.

4. Using the [œœ (REW)] /[√√(FF)] buttons, find the first position you wish to play back.

5. Press the [√/❙❙ (PLAY/STILL)] button.

■The images you recorded will appear on the TV

after a few seconds.

■If a tape reaches its end while being played back, the tape will rewind automatically.

A/V

✤A/V 1.

■:

Multi Cable	Camcorder	■	:	-
AV/ S		■	:
		2.	VCR
		3.	[Power]	[PLAYER]
Signal flow		4.	[Mode]	[TAPE]
		5.	VCR
Multi Cable
		■	VCR	Line
		■

1.[Power] [PLAYER]

R		2.	[Mode]	[TAPE]
E
	A	3.
	R
CAM	E	4.
			[œœ (REW)] /[ √√ (FF)]
PL		5.	[ √/■■ (PLAY/STILL)]
AY			■
E
R
A			■
E R
CAM

[ Notes ]

■The playback mode (SP/LP) is selected automatically.

■If the VCR has an S-Video input terminal, you may use S-Video connector for better quality.

■The S-Video connector transmits video only. Connect audio cables for sound.

■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

[]

■(SP/LP)

■ VCR S-Video , S-Video

■S-Video

■(Audio L)

64