Samsung VP-D964Wi manual Zero Memory, 00000

ENGLISH

Basic Recording

Searching quickly for a desired scene (Setting the

ZERO MEMORY)

✤The ZERO MEMORY function works in both <Camera> and <Player> modes. ➥page 19

✤You can mark a point on a tape that you want to return to following playback.

(ZERO MEMORY)

✤ <Camera> () <Player> ()

➥19

✤

1.	Set the [Power] switch to [CAMERA] or [PLAYER].		1
2.	Set the [Mode] switch to [TAPE].
3.	Press the [ZERO MEMORY] button on the remote
	control before the recording or during playback at the
	point where you wish to return.
	■ The time code is changed to a tape counter that
	is set to ZERO MEMORY with the <	0:00:00>
	(ZERO MEMORY indicator).

■If you want to cancel the ZERO MEMORY function, press the [ZERO MEMORY] button again.

4.Finding the zero position.

■ When you have finished playback, fast forward or rewind the tape in stop mode.

The tape stops automatically when it reaches the zero position.

■ When you have finished recording, set the [Power] switch to [PLAYER] and press the [œœ (REW)] button.

The tape stops automatically when it reaches the zero position.

5.The tape counter with the < > (ZERO MEMORY indicator) disappears from the display and the tape counter is changed to the time code.

PL
AYE
R
	A
	R
CAM	E

PL
AY
E
R
	A
E	R
CAM

œ

1. [Power] [CAMERA] [PLAYER]

2. [Mode] [TAPE]

3.

[ZERO MEMORY]

■

< 0:00:00>

■

[ZERO MEMORY]

4.

■

■ [Power]

[PLAYER] [œœ (REW)]

5.

[ Notes ] ■

■In the following situations, ZERO MEMORY mode may be cancelled automatically:

-At the end of the section marked with the ZERO MEMORY function.

-When the tape is ejected.

- When you remove the Battery Pack or power supply. ■

■The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.

37