preparation
Charging the battery pack | POWER switch |
|
• Use
• The battery pack may be charged a little at the time of purchase.
1. Slide the POWER switch downwards to turn off the power.
2. Open the LCD screen and attach the battery pack to the DVD camcorder. page 20
3. Open the jack cover.
4. Connect the AC power adaptor to the DC IN jack of your DVD camcorder.
5.Connect the AC power adaptor to a wall socket.
•The ACCESS/CHG (charging) indicator lights up in orange and charging starts. The ACCESS/CHG (charging) indicator lights up in green when the battery is fully charged.
6.Once charged, disconnect the AC power adaptor from the DC IN jack on your DVD camcorder.
•Even with the power switched off, the battery pack will still discharge if it is left attached to the DVD camcorder. It is recommended that you remove the battery pack from the DVD camcorder.
Charging indicatorThe colour of the ACCESS/CHG (charging) indicator indicates charging state and disc accessing state.
|
| Charge |
| Access |
|
Charging state | Charging | Fully Charged | Error | Disc accessing | |
| |||||
|
|
|
|
|
|
LED colour | (Orange) | (Green) | (Red Blink) | (Green Blink) |
|
|
|
22_ English