•This function is available in DISC Play mode. page 26
•This function enables you to narrate over a
•When you want to copy a DVD onto other AV devices (DVD recorder, VCR), you can dub your voice sound incoming from the internal microphone of your DVD camcorder to an AV device, instead of copying the audio signals on a
DVD camcorder | TV |
1.Connect the DVD camcorder to your AV device with AV cable.
2.Set the Storage mode switch to DISC.
3.Insert the disc you wish to play back in this DVD camcorder.
4.Press the MODE button to set the Play ( ) mode.
5.Press the MENU button and use the Joystick to set the desired “Play Mode” on the menu. page 45
6.Use the Joystick to select the desired image.
7.Press the Recording start/stop button on a point where you want during the playback.
•Voice Plus icon () is displayed and “Voice +” will blink for a while.
•Sound signals incoming from the internal microphone will be dubbed to a connected AV device, instead of copying the
8.To cancel, press the Recording start/stop button again.
Signal fl ow
AV cable
003 |
| 3/12 |
Playlist | Move | Play |
00:00:59/00:02:30
Voice +
003
•Voice Plus is available only when the AV cable is connected. If a USB cable is connected, the Voice Plus function may not operate properly.
•If you perform Stop, Play/Pause, REW, or FF while the Voice Plus function is being executed, the Voice Plus function will be deactivated.
•When the Voice Plus function is in progress, the MENU button or PHOTO button does not work.
•The Voice Plus function does not affect the original sound on the recorded disc.
•Sound is transferred from the internal microphone on this DVD camcorder to the connected AV device, when using the Voice Plus function. Make sure the microphone is not covered or blocked in any way.
•Adjust the sound volume on the connected external device. (TV, audio system etc.)
•Feedback may occur if the DVD camcorder is placed near the speaker of an external device.
•Turn down the volume of the external device and keep the DVD camcorder a reasonable distance away.
•Make sure to set “AV In/Out” to “Out” before connecting to an external device.
English _105