•Adjust the sound volume on TV.

•The remote control is useful when operating the DVD camcorder while viewing an image on TV screen. (VP-DX205(i)/DX2050/DX210(i) only)

•If only a mono audio input is available on the connected device (TV, etc.), use the audio cable with the white jack (Audio L).

•When a copy-protected video is played back, no image will appear on TV screen.

•When “TV Display” is set to “Off,” OSD(On-Screen-Display) does not appear on the TV screen. page 97

•Information that the DVD camcorder is recording will appear on the TV screen:

Press the / (Display/LCD enhancer) button to switch the display status. page 32

•Howling may occur when the DVD camcorder is too close to the other devices or the volume is high. Keep the DVD camcorder a reasonable distance away from the other connected devices.

Image display depending on TV screen ratio

Recording ratio

Wide (16:9) TV

4:3 TV

Videos recorded in the 16:9 ratio (16:9 Wide: On)

Videos recorded in the 4:3 ratio (16:9 Wide: Off)

Photos (VP-DX205(i)/DX2050/DX210(i) only)

• Refer to page 82 for “16:9 Wide” setting.

English _103