troubleshooting
Adjusting the image during recording
Symptom | Explanation/Solution | |
| • Set “Focus” to “Auto.” page 79 | |
Focus does not adjust | • The recording conditions are not suitable for auto focus. | |
automatically. | Adjust the focus manually. page 80 | |
| • The lens is dusty on the surface. Clear the lens and check the focus. | |
|
| |
The image appears too bright or | • This may occur when you make a recording under a fluorescent, sodium or | |
mercury lamp. | ||
flickering, or changes in colour. | ||
Cancel “iSCENE” to avoid or minimise the phenomena. page 74 | ||
| ||
|
| |
Image’s colour balance is not | • White balance adjustment is required. Adjust to the proper “White Balance.” | |
natural. | page 75 | |
|
|
Playback on your DVD camcorder
Symptom | Explanation/Solution | |
Using the playback (Play/Pause) | • Press the MODE button to set to the Play ( ) mode. | |
• Images recorded using another device may not be played on your DVD camcorder. | ||
function does not start playing. | • Select a proper storage media. | |
| • Check out the memory card compatibility. page 61 | |
The Skip or Search function does | • If the temperature inside the camcorder is too high, it may not function properly. | |
not work properly. | Turn the camcorder off, and turn it on again a little later. | |
Connecting/Dubbing with other devices (TV, DVD players, etc) | ||
|
| |
Symptom | Explanation/Solution | |
You cannot view the image or hear | • Connect the audio of the audio/video cable to your camcorder or to the connected | |
device (TV, DVD recorder, etc). (Red colour- right, White colour- left) | ||
the sound from the connected | ||
• The connection cable (AV cable) is not connected properly. Make sure that the | ||
device. | ||
connection cable is connected to the proper jack. pages 102~103 | ||
|
128_ English