CONNECTING THE USB CABLE

( )

•This function is available in CARD Video Record/CARD Photo Record/CARD Video Play/CARD Photo Play mode.

page 26

Computer

•To copy the video and photo files to your computer, connect your camcorder to the computer with a USB cable.

1. Set the “USB Connect” to “Mass Storage.” page 97

• Press the MENU button. Use the Joystick to select “Settings” “USB Connect” “Mass Storage.”

2.Connect the DVD camcorder to the computer with a USB cable.

•Do not apply excessive force when inserting or extracting a USB cable into/from a USB jack.

•Insert a USB cable after checking the direction of its insertion is correct.

•Hi-speed USB (USB 2.0) recommended.

DVD camcorder

USB Connected.

[CARD]

Disconnecting the USB cable

After completing the data transmission, you must disconnect the cable in the following way:

1.Click the “Unplug or eject hardware” icon on the task tray.

2.Select “USB Mass Storage Device” or “USB Disk”, then click “Stop.”

3.Click “OK.”

4.Disconnect the USB cable from the DVD camcorder and computer.

•We recommend using the AC power adaptor as the power supply instead of the battery pack.

•When the USB cable is connected, turning the camcorder on or off may cause the computer to malfunction.

•If you disconnect the USB cable from the computer or the DVD camcorder while transferring, the data transmission will stop and the data may be damaged.

•If you connect the USB cable to a computer via a USB HUB or simultaneously connect the USB cable along with other USB devices, the DVD camcorder may not work properly. If this occurs, remove all USB devices from the computer and reconnect the DVD camcorder.

English _111