Preparing
To use the Battery Pack
ENGLISH
19

How long will the battery last for shooting?

✤Depends on how often you are likely to use the zoom feature during recording.

Recharging the Battery Pack

1. Attach the battery pack to the camcorder.
2. Connect the AC Power Adapter to an AC cord
and connect the AC cord to a wall socket.
3. Connect DC cable to DC jack of the camcorder.
4. Switch the camcorder off.The charging LED next
to the DC IN socket will start blinking to indicate
the battery is charging
- Flashing once a second :The battery is less
than 50% charged.
- Flashing twice a second :The battery is
50% ~ 75% charged.
- Flashing three times a second :The battery is 75% ~ 100% charged.
- Constantly on :Charging is complete.
- On for a second and off for a second:There is an error and the charger needs to be reset. Remove
and replace the DC supply to the camera.If the problem continues, contact the nearest service
agent.
5. If recharging is completed, separate the camcorder, AC power adapter, and battery pack.
■Even if the power is turned off, battery will be discharged.
Note: The battery pack may be slightly charged at the time of purchase.
1

4

2 3

OFF