ENGLISH
59
Troubleshooting Check
Troubleshooting Check✤ Before contacting a service centre, perform the following simple checks.
They might save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Inform that... Action
slow the battery pack is almost Exchange it with a charged
discharged. one.
fast the battery pack is fully Exchange it with a charged
discharged. one.
TAPE END slow the tape has almost reached Prepare a new one.
its end.
TAPE END no the tape reached its end. Change to a new one.
TAPE slow there is no tape in the camcorder. Insert a tape.
TAPE slow the tape is protected Check the red tab on the tape
from recording. is not pushed over the hole.
D.EMG slow the camcorder has some 1. Eject the tape.
C.EMG mechanical fault. 2. Set to OFF.
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your local
service center if the problem
continues.
DEW slow moisture condensation see page 62.
has formed in the camcorder.