ENGLISH
Playing back the Tape
Adjusting the LCD
✤The procedure for adjusting the LCD display in PLAYER mode is the same as the procedure for adjusting the LCD display in CAMERA mode, except that the power switch must be set to PLAYER instead of CAMERA. Please refer to page 26.
Setting the Speaker ON/OFF
✤The speaker will be turned ON/OFF by opening/closing the LCD.
✤The speaker ON/OFF setting operates when the LCD is opened. When the SPEAKER setting is set to OFF, the speaker will be muted even after the LCD display has been opened.
1.Set power switch to PLAYER mode.
2.Press MENU ON/OFF button, then the MENU list will appear.
3.Turn UP/DOWN dial to SPEAKER.
............SPEAKER | ON |
|
DISPLAY | OFF |
|
C.RESET | 0:00:00 | |
4.Press ENTER to change the setting.
5.Press the MENU ON/OFF button again to exit the setting SPEAKER setting screen.
............SPEAKER | OFF |
|
DISPLAY | OFF |
|
C.RESET | 0:00:00 | |
Volume control
✤The Speakers volume can be controlled by turning the UP/DOWN dial during playback.
Note: The volume cannot be changed while the MENU list is visable.
55
