Before you start

Initial settings

Run Calibration (recommended)

Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration.

1.Power off, and then power on the washing machine.

2.Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The “Cb” message appears.

3.Press START/PAUSE to run the Calibration cycle.

4.The drum rotates clockwise and counter-clockwise for about 3 minutes.

5.When the cycle is complete, “0” appears on the display and the washing machine turns off automatically.

6.The washing machine is now ready for use.

start you Before

English  29 

Untitled-2 29

 

 

5/23/2016 5:56:12 PM