C

C

3.Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).

4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.

5. Turn part (C) in the arrow direction to tighten it.

Installation

E

6. While holding down part (E), connect the water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.

7.If you are using a screw type of water tap, use the provided screw-type adaptor to connect to the water tap as shown.

English  21

 

 

 

 

WD90K6400OW_03745R_EN.indd 21

2016/9/13 11:00:35