Operations
Control panel10
02
08
11
09
03 04 
05 
06 07
01 | Cycle Selector | Turn the dial to select a cycle. | ||
|
|
| ||
02 | Display | The display shows current cycle information and estimated time | ||
remaining, or an information code when a problem occurs. | ||||
|
| |||
|
|
| ||
03 | Temp. | Press to change the water temperature for the current cycle. | ||
|
|
| ||
04 | Rinse | Press to change the rinse count for the current cycle. You can set the | ||
rinse count to a max of 5, depending on the cycle. | ||||
|
| |||
|
|
| ||
|
| Press to change the spinning speed for the current cycle. | ||
|
| • | Rinse Hold ( ): The final rinse process is suspended so that the | |
|
|
| laundry remains in the water. To unload the laundry, run a drain or | |
|
|
| spin process. | |
05 | Spin | • | No Spin : The drum does not spin after the final drain process. | |
• | Spin Only : To run the Spin Only cycle, press Spin for 3 seconds. | |||
|
| |||
|
|
| When the cycle time and spinning speed appear, press Spin | |
|
|
| repeatedly until a desired spinning speed is selected. Then, press | |
|
|
| Start/Pause to start the cycle. The spinning time depends on the | |
|
|
| selected cycle. | |
|
|
| ||
|
| Press to select an option from Intensive and Pre Wash. | ||
06 | Options | Press again to deselect. | ||
|
| • Availability of the options depends on the cycle. | ||
|
|
| ||
07 | Bubble Soak | Press to activate/deactivate the Bubble Soak function. This function | ||
helps remove a wide variety of stubborn stains. | ||||
|
| |||
Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined by
08 Delay End the machine’s internal logic. For example, this setting is useful for programming your machine to finish a wash at the time you normally return home from work.
•Press to choose a preset unit of hours.
Operations
English 29