Recording MP3s
✽To move to other modes from LINE_ENC mode, refer to “Changing Mode”.
1Connect the Audio OUT port
(or Line OUT) on the external audio
source to the ENC port on the device with the Line in cable.
●Press the play button on the external device to
play the music to record.
2Press and hold the REC button to start MP3 recording.
●If the 
button is pressed, recording is paused and if the 
button is pressed again, the recording resumes.
3If the REC button is pressed during recording, the recording stops and an MP3 file is created.
●The files are recorded in the order of L ****001, L ****002.... and saved as MP3 files in the [LINE_ENC] folder after recording.
✍Note
-Bit Rates can be set within the range of 32Kbps~192Kbps.
-Beeps are disabled while recording.
✍Notice
-Do not disconnect the Line in cable during recording.
-If the battery is not sufficiently charged, the player will not completely record the file.
-Adjust the volume of the external audio source to a suitable level and record it. If the volume level is too high or low, the sound quality might be poor.
36
