Sangean Electronics DDR-31+ Setting the time and the date manually

Setting the time and the date manually

The DDR-31 Plus will automatically set its clock when tuned to a DAB radio station or to an FM station which is broadcasting the time via RDS.

If the clock cannot be set using DAB or FM radio then you will need to set the time and the date manually before the alarm function can be used. The time and the date may be set while the unit is in StandBy mode or while playing.

If it becomes necessary to set the time and the date manually, please follow these steps:

1.Press and release the On / StandBy button to switch on the radio.

2.Select the required waveband by pressing the Band button.

3.Press and release the Advanced button. The display will show “FM scan zone”.

4.Press the Tuning Up or Down buttons to switch “System”.

5.Press and release the Select button to enter the Time menu.

6.Press and release the Select button to enter the “Set 12/24 hour“ menu.

7.Press the Tuning Up or Down buttons to switch the “Set 12/24 hour“.

8.Press and release the Select button to confirm your selection. The 12/24 hour setting is stored in the radio.

9.Press the Tuning Up or Down buttons to switch the “Set Time/Date“.

10.Press and release the Select button to enter the “Set Time/Date“ menu.

GB

18