Sansui HDLCD1900A Add/Delete channel, To Select Analog Channels, To Select Digital Channels, Vhf

Adding Channel

If you find a new channel unregistered, you can add the new channel into the channel memory.

Tune in the new channel.

2 Press MENU. The menu screen wilt appear.

3 Press • or • to select "Channel", then press _ or

ENTER.

Press • or • to select"Add/Delete", then press or ENTER.

Press • or • to select"Adding Channel", then press I_ or ENTER. The new channel will be

added into the channel memory.

Press EXIT to return to the normal screen.

Add/Delete channel

You can select the channel that you want to skip.

Press MENU.The menu screen wilt appear.

2 Press • or • to select "Channel", then press _ or

ENTER.

3 Press • or • to select "Add/Delete", then press or ENTER.

4 Press • or • to select "Add/Delete", then press or ENTER.

5 Press • or • to select the channel that you want to skip.

Press • or _ to select "Add" or "Delete", whichever function you want to perform.

Repeat steps 5 - 6 for other channels you want to add or delete.

Press EXIT to return to the normal screen.

Clear All

All channels are deleted from the channel memory. Press MENU.The menu screen wilt appear.

Press • or • to select"Channel", then press t,- or

ENTER.

Press • or • to select"Add/Delete", then press or ENTER.

Press • or • to select"Clear All", then press _ or

ENTER.

Press EXIT to return to the normal screen.

TV operation

To turn on the TV, press POWER. (POWER indicator on the front of the unit

changes green. It may take approx. 10 seconds for a picture to appear on screen.)

Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen

by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases.

3 Set the Signal Type option to the appropriate position (see "Air/Cable selection" on page 15).

4 Press the Direct Channel Selection (0-9, -) buttons to select the channel.

(If you press only channel number, channel selection wilt be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel 2, press 2.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2.

100-125: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the - button, followed by the remaining number.

Example, to select channel 015-001, press 0, 1, 5,-, 1.

•If a channel is selected with only audio content, "Audio only" will be displayed on the screen.

•If a channel is selected with a weak digital signal, "Digital channel signal strength is low" will be displayed on the screen.

The same program may be available on either

an analog channel or a digital channel.You may choose to watch either format.

•If a channel is selected to which you have not subscribed, "Digital channel is encrypted" will be displayed on the screen.

VHF/UHF/CABLE	CHANNELS
Air		Cable
VHF		VHF
2-13		2-13
UHF	STD/H RC/I RC
14-69	14-36	(A)	(W)
	37-59	(AA)	(WW)
	60-85	(AAA) (ZZZ)
	86-94	(86)	(94)
	95-99	(A-5) (A-1)
	100-125	(100)(125)
	01	(5A)

16