Sansui HDLCD1900A manual Antenna connections, Combination VHF/UHF Antenna Separate, RInK

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

r

Antenna

Jack

_75Coaxialohm Cable

Antenna

300-75 ohm

Matching Transformer

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm

matching transformer may be necessary.

J

Combination VHF/UHF Antenna (Separate

300-75 ohm Matching Transformer

/

VHF 300 ohm Ilil

VHF and UHF 300 ohm twin-lead wires)

Connect the UHF 300 ohm twin-lead wire to

the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.

-

RInK

Antenna	_00	ohm
Jack
	Combiner

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

r	Connect the VHF 75 ohm cable and UHF 300 ohm
	twin-lead wire to the Combiner (not supplied).Attach
	the Combiner to the Antenna Jack.
	VHF 75 ohm

Antenna

Jack

Combiner

k.J

10