Labeling channels, To create channel labels

NOTE:

•If a channel with no broadcast is selected, the sound will automatically be muted.

•It may take a few seconds for a digital channel picture to appear on screen after being selected.

To select the video input source

Press INPUT SELECT, then press A/T or corresponding Number buttons (0-6) to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select TV, Component or PC depending on which input jacks you used to connect your devices.

OH+I-

Press and release OH + / -. The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See "Memorizing channels" on pages 15 and 16.

DISPLAY

Press DISPLAY to display the current information on the screen.

When the TV receives a digital signal, the digital information will appear.

• Channel number • Station name

• Channel label (if preset) • Broadcast program name

•	V-Chip	rating	•	Signal	type
•	Sleep	timer	•	Audio	language
•	Program guide		•	Picture	size
•	Resolution

When the TV receives a analog signal, the analog information will appear.

•	Channel number		•	Channel label (if preset)
• V-Chip		rating	•	Signal type
•	Sleep	timer	•	Audio information (Stereo or SAP)
•	Picture	size	•	Resolution

Press DISPLAY again to clear the call display.

NOTE:

•After a few seconds, DISPLAY screen wilt return to normal TV-operation automatically.

RECALL

This button allows you to go back to the last channel selected by pressing RECALL. Press RECALL again to return to the last channel you were watching.

MUTE

Press MUTE to switch off the sound. The -I-V'ssound

will be silenced and "Mute" will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or -.

SLEEP

To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP but- ton (Off, Oh 10m, Oh 20m ..... 2h 0m). After the sleep

time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.

oh lore