Sansui HDLCD1900A manual Sound control adjustment, Audio Program SAP, Language

6 After adjusting, press ENTER to return to the PC

Setting menu. Then continue to adjust the other items.

7 Press EXIT to return to the normal screen.

NOTE:

•If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal

Monitor-screen automatically.

•The PC settings are not effective for other input modes.

DNR

DNR (Digital Noise Reduction) can reduce

the roughness of the picture. (This function is available only for analog broadcast.)

Press MENU.Then press • or • to select "Picture", then press l_ or ENTER.

Press • or • to select"DNR". Press • or _ to select "On" or "Off".

Press EXIT to return to the normal screen.

Sound control adjustment

Press MENU.Then press • or • to select"Audio", then press _ or ENTER.

Press • or • to select the item you want to adjust.

Selecting Stereo/Second

Audio Program (SAP)

The multi-channel TV sound (MTS) feature provides high-fidelitystereo sound. MTS also can transmit a second audio program (SAP)

containing a second language or other audio information.

When the TV receives a stereo or SAP broadcast, the word "Stereo" or "SAP" displays on-screen every time you press DISPLAY.

1 Press MENU. Then press • or • to select"Audio", then press _ or ENTER.

2 Press • or • to select "MTS", then press • or to select "Stereo".

Press EXIT to return to the normal screen.

NOTE:

•Generally you can leave your TV in stereo mode because the TV automatically outputs the type of sound being broadcast (stereo or mono).

•If the stereo sound is noisy, select"Mono" to reduce the noise.

To listen to a second audio program (SAP)

Press • or _- to select"Sap" in step 2 above. The TV speakers will output the second audio program instead of normal audio.

Selecting the audio

language

Bass: Press • or I_ to adjust the bass sound.

Treble: Press • or I_ to adjust the treble sound.

Balance: Press • or _- to obtain an equal sound level from both speakers.

• Press • or • to change the adjusting item.

3 After you desired setting, press EXIT to return to the normal screen.

When two or more audio languages are included in a digital signal, you can select one of the audio language. (This function is available only for digital broadcast.)

Press MENU. Then press • or • to select"Audio", then press _ or ENTER.

Press • or • to select"Audio Language". Then press • or _ to select your desired language.

Press EXIT to return to the normal screen.

23