Cinema Wide1 picture size (for 4:3 format
programs)
To fill the screen, the right and left edges are extended,
however; the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
Cinema Wide2 picture size (for letter box
programs)
The entire picture is uniformly
(retains its original proportion).
The top and bottom edges of the picture may be hidden.
Film Mode
A smoother motion may be obtained by setting the Film Mode to "On" when you view a DVD from the DVD player connected with the component input.
Press MENU.The menu screen will appear.
Press • or • to select"Picture", then press _ or
ENTER.
Press • or • to select"Film Mode".
Press • or _ to select"On" or "Off".
Press EXIT to return to the normal screen.
Cinema Wide3 picture size (for letter box
programs with subtitles)
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the top and the bottom.
The top and bottom edges of the picture may be hidden.
©
Full picture size (for 16:9 source programs)
Picture control adjustment in the PC mode
You can adjust to optimize the performance of the TV in the PC mode.
Press INPUT SELECT, then press •/• or Number button (6) to select the PC mode.
Press MENU.Then press • or • to select "Picture", then press _ or ENTER.
Press • or • to select"PC Setting", then press or ENTER.
Full will displaythe picture at the maximumsize.
Press•or• to adjust.
Press • or
Hor Position:
to select the desired item you want
to adjust the setting.
To adjust the horizontal position of the image on the Component or PC mode.
NOTE:
•Some High Definition and/or Digital broadcasts may not allow you to change the picture size.
•In COMPONENT mode with a scanning rate of 720p or 1080i, only the Cinema Wide2 and Full picture size features are available.
•In PC Mode, only the Natural and Full picture size features are available.
•In Cinema Wide2 picture size, some of the on screen display items may be positioned off the
visible portion of the screen.
Ver | To adjust the vertical position of the | |
Position: | image on the Component | or PC |
| mode. |
|
Clock: | To minimize any vertical | bars |
| or stripes visible on the screen | |
| background. |
|
Phase: | This must be adjusted after the | |
| frequency of the Component or | |
| PC mode has been set to 60Hz to | |
optimize picture quality (page 14).
22
