Sansui HDLCDVD220 owner manual Antenna connections, Ohm Matching Transformer

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

Jack

(_	_	75 ohm Coaxial
		Cable

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm

matching transformer may be necessary.

Antenkna_

300-75 ohm Matching

Transformer

Combination VHF/UHF Antenna (Separate

300-75 ohm Matching Transformer

Antenkna VHF 300 ohm

UHF 300 ohm

Combiner

VHF and UHF 300 ohm twin-leadwires)

Connect the UHF 300 ohm twin-lead wire to

the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-leadwires)

Connect the VHF 75 ohm cable and UHF 300 ohm

twin-lead wire tothe Combiner (not supplied). Attach the Combiner to the Antenna Jack.

Antenna VHF 75 ohm

Combiner

IMPORTANT: Go to page 15 to choose the signal and search for channels.

13