Sansui HDLCDVD220 Temporary disabling of rating level by DVD disc, Setting the new password

Models: HDLCDVD220

1 44
Download 44 pages 59.54 Kb
Page 34
Image 34

,4

¢-'1"The parental level list will appear. Press • or to select the level 1 to level 8. The limitation will be more severe as the level number is lowered.Then press ENTER.

Parental: o_

5 Press ENTER.

Now your new password has been set.

Be sure to remember this number!

NOTE:

Do not forget the password. If you forget the password, contact Customer Service at 1-800-289- 0980. The original remote control will be required.

Level Off : The parental control setting does not function.

Level 8 : Virtually all DVD software can be played back.

Level 1 : DVD software for adults cannot be played back.

Select from level 1 to level 8. The limitation will be more severe as the level number decreases.

5 Press SETUP/'rv MENU to remove the menu screen.

NOTE:

If each setup (P.32~34) has been completed, the unit will use these settings during DVD playback.

Each setup will be retained in memory.

Depending on the discs, the unit may not be able to limit playback.

Some discs may not be encoded with specific rating level information though its disc jacket says "adult". For those discs, the age restriction will not work.

After the rating is locked, the setting cannot be changed unless you enter the correct password.

Setting the new password:

1 Press SETUP/TV MENU in the stop mode or No Disc.

Press • or • to select _ option, then press 4/I, or ENTER.

,I Press • or • to select"Password", then press • or ENTER.

"Enter Current Password" screen will appear.

Press Number buttons (0-9) to enter the password you have stored.

• If you input a wrong number, press CANCEL.

4" Then press ENTER. "Enter New Password" screen will appear. Press Number buttons (0-9) to input the new password.

Temporary disabling of rating level by DVD disc

Some pre-recorded DVD discs may attempt to

temporarily cancel the rating level that you have

set.You will be given the option to allow or not allow the override.

1 Load a DVD disc (see page 26).

2 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the "Reading" screen will change, depending

on which disc is played. If you select "YES" with ENTER key, password input screen will then appear.

3 Enter the password with Number buttons (0-9).

Then press ENTER.

• If you interrupt the entering, press RETURN.

,4

¢-'1"Playback will commence if the entered password was correct.

NOTE:

This temporary cancellation of the rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

Page 34
Image 34
Sansui HDLCDVD220 owner manual Temporary disabling of rating level by DVD disc, Setting the new password