Sansui HDLCDVD220 owner manual Connections to other equipment, To connect the LCD TV/DVD to a VCR

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV/DVD to a VCR

Rear	of	the	unit	VCR
			To VIDEO/AUDIO IN
	@	@	@_._ _	TO Audio/Video OUT /
[]	@	@	Audio/Video	cord (not supplied)

To connect the LCD TV/DVD to a VCR with an S-Video cord

If you connect aVCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear side of the unit.

The S-Video cable only carries the video signal.The audio signal is separate.

NOTE:

•When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.

Rear	of the		unit
				To S-VIDEO	IN			To S-Video OUT	VCR
		_	_ I	_	S-Video	cord			]
	@	@	,_'_	_			(not	supplied)
[]	@	@	@_._ _		Audio	cord	(not	supplied)

To AUDIO	IN	To Audio OUT
To connect to a DVD player	with Component	Video Input

You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD

player with the COMPONENT video cables (not supplied).

Rear of the unit

@	© Z i <>m.		__			__f<:>			ovo
	@_=-_	cO-,,,/	Audio	cord (not supplied) _				r,/"
___	@,_ @1	To COMPONENT		AUDIO	IN	To Audio	OUT	i	i
		_	Componentvideocord			_1_
			(not supplied)
		To COMPONENT		IN	To Component		OUT

NOTE:

•Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and 480p/720p progressive signals.