3 Press • or to select "Ch Label", then press • or ENTER.

The "Ch Label" menu will appear.

4 Press 41or • to select a channel you want to label, then press •.

5Press 41or • repeatedly until the character you want appears in the first space.

The characters rotation as follows:

r0" °" 9 <->A i ";ZPI_EE _ ' '() @/+=- q

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

OWhen you finish inputting the label name, press

EXIT/CANCEL to return to the normal screen.

7Repeat steps 4-5 for other channel.You can assign a label to each channel.

To clear

a

Ch Label

After step

4

above,

press • or • to select "Label

Clear", then

press

• or ENTER.

NOTE:

The channel labels will be reset after "Automatic Search" on page 15.

Labeling video inputs

The Video Label feature allows you to label each

input source for your TV.

1Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2 Press • or • to select "Setup", then press • or

ENTER.

3 Press • or • to select "Video Label", then press

or ENTER.

4 Press • or • to select an input which you want to label.

5 Press 4 or • to select the desired label for that

input source.

-: Uses the default label name

VCR :Video cassette recorder

DVD : DVD video

DTV

: Digital

TV set-top box

SAT

: Satellite box

CBL

: Cable

box

HD

: HDMI

device (only for HDMI inputs)

6 Press EXIT/CANCEL to return to the normal screen.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to "TV Rating" and "Movie

Rating" if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.

To register a password

1 Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2 Press • or • to select"Lock", then press • or

ENTER.

3 Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER.

"€" appears instead of the number.

4 Enter the same password again to confirm, then press ENTER.

The password is now registered.

NOTE:

If you forget the password, contact Customer Service at 1-800-289-0980 for assistance. Your original remote control will be required.

To avoid forgetting the password, write it down and keep in a safe place.

To set the V-Chip

1 Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2 Press • or • to select"Lock" menu, then press

• or ENTER.

3 Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.

Page 18
Image 18
Sansui HDLCDVD220 Labeling video inputs, Setting the V-Chip, Press or to select an input which you want to label