Sansui HDLCDVD220 Setting the picture size, Film Mode, Full picture size for 169 source programs

Setting the picture size

You can view 480i and 480p format programs in a variety of picture sizes-- Natural, Cinema Wide1, Cinema Wide2 and Full.

Selecting the picture size

1 Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2 Press • or • to select "Picture", then press • or

ENTER.

3 Press • or • to select "Picture Size", then press

•or ENTER to display Picture Size menu. Press

•/• or corresponding Number buttons (0-3)

to select the desired picture size, as described below.

NOTE:

•Selectable picture sizes may vary depending on the input source or broadcast signal.

•Picture Size menu also can be displayed by pressing SCREEN SIZE on the remote control.

4 Press EXIT/CANCEL to return to the normal screen.

Natural picture size

In some cases, this image will display the size of standard 4:3 with a black side bar.

Cinema Wide1 picture size (for 4:3 format programs)

Tofill the screen, the right and left edges are extended,

however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

Cinema Wide2 picture size (for letter box

programs with subtitles)

To fill the width of the screen, it is extended

horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

Full picture size (for 16:9 source programs)

Full will display the picture at the maximum size.

NOTE:

•Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

•In HDMI or COMPONENT mode with a scanning

rate of 720p or 1080i, only the Full picture size feature is available.

•In PC Mode, only the Natural and Full picture size features are available. Additionally this feature will not work when display mode is WXGA.

Film Mode

A smoother motion may be obtained by setting the Film Mode to "On" when you view a DVD.

,,4

Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2 Press • or • to select"Picture", then press • or

ENTER.

3 Press • or • to select"Film Mode". Press • or • to select "On" or "Off".

Press EXIT/CANCEL to return to the normal screen.