Sanyo AVM-32F4, AVM32F9 warranty Fine Tuning, UP menu is displayed, Symbol disappears, Fine-tuned

SET-UP

FINE TUNING

If the reception is clear, you do not have to fine-tune the channel, because this is done automatically during auto program and manual memory.

If, however, the signal is weak or distorted, you may have to fine-tune the channel manually.

1.	Press CH	/ buttons or use the number buttons to select a channel you want to adjust.
2.	Press MENU button, move the cursor to "SETUP" option and press VOL		+button. The "SET
	UP" menu is displayed.

SET-UP

LNA (Low Noise Amplifier) EFFECTS

Set LNA ON to increase a weak incoming signal. However, if you are located in a strong signal area, such as nearby a broadcasting station, and if the picture is distorted, set LNA OFF.

1.	Press CH	/ buttons or use the number buttons to select a channel you want to adjust.
2.	Press MENU button, move the cursor to "SETUP" option and press VOL		+button. The "SET
	UP" menu is displayed.

MENU

SETUP

MENU

PICTURE

SOUND

TIME

SET UP

FUNCTION

LANGUAGE : ENGLISH

: SEL. + : ENTER : EXIT

SETUP
ANTENNA	: CATV2
AUTO PROGRAM
FINE TUNE	: 0
LNA		: ON
A/D: MEMORY
: SEL.	: ADJ	: PREV.

PICTURE

SOUND

TIME

SETUP

FUNCTION

LANGUAGE : ENGLISH

: SEL. + : ENTER : EXIT

ANTENNA	: CATV2
AUTO PROGRAM
FINE TUNE	: 0
LNA	: OFF
: SEL. + : SET	: PREV.

3. Press CH / buttons to place the cursor on the "LNA" option.

3. Press CH	/ buttons to place the cursor on the "FINE TUNE" option.
4. Use VOL	+/- buttons until you obtain a sharp and clear picture and good sound quality.

4.Press the VOL+ button.

Whenever this button is pressed, the mode will change as follows.

SETUP
ANTENNA	: CATV2
AUTO PROGRAM
FINE TUNE	: 0
LNA		: ON
A/D: MEMORY
: SEL.	: ADJ	: PREV.

SETUP
ANTENNA	: CATV2
AUTO PROGRAM
FINE TUNE	: +2
LNA		: ON
A/D: MEMORY
: SEL. + : ADJ		: PREV.

SETUP		SETUP
ANTENNA	: CATV2	ANTENNA	: CATV2
AUTO PROGRAM		AUTO PROGRAM
FINE TUNE	: 0	FINE TUNE	: 0
LNA	: OFF	LNA	: ON
: SEL. + : SET	: PREV.	: SEL. + : SET	: PREV.

5. If you wish to memorize the fine-tuned frequency for the channel, press ADD/DEL button. The

[	] symbol (red color) appears to the right of the channel number. To delete the memory,
press the same button again. The [		] symbol disappears.
NOTES	The AFT (Automatic Fine Tuning) mode does not operate on the channels that are
	fine-tuned.
	After the Auto Channel Programming has been performed, memorized channels
	are automatically tuned to their optimum frequencies.

16 17