Sanyo C0971 Loose wiring may cause, Terminal to overheat or result, Unit malfunction. a fire

WARNING	Loose wiring may cause the
	terminal to overheat or result
	in unit malfunction. A fire
	hazard may also exist. There-
	fore, be sure all wiring is
	tightly connected.

When connecting each power wire to the corresponding terminal, follow the instructions “How to connect wiring to the terminal” and fasten the wire securely tight with the fixing screw of the terminal plate.

How to connect wiring to the terminal

a) For Indoor Unit

9/32"

STRIP (7 mm) (ACTUAL

SIZESIZE)

(1)Cut the wire end with a cutting pliers, then strip the insulation to expose the wire about 9/32" (7 mm). See the label (Fig. 28) near the terminal plate.

(2)Using a screwdriver, loosen the terminal screw on the terminal plate.

(3)Insert the wire and tighten the terminal screw com- pletely using a screwdriver.

b) For Outdoor Unit

■For solid core wiring (or F-cable)

(1)Cut the wire end with a cutting pliers, then strip the insulation to expose the solid wire about 15/16"

(25 mm). (Fig. 29)

(2)Using a screwdriver, remove the terminal screw(s) on the terminal plate.

(3)Using the pliers, bend the solid wire to form a loop suitable for the terminal screw.

(4)Shape the loop wire properly, place it on the termi- nal plate and fix it securely with the removed termi- nal screw using a screwdriver.

■For stranded wiring

(1)	Cut the wire end with a cutting pliers, then strip the
	insulation to expose the stranded wiring about 3/8"
	(10 mm) and tightly twist the wire ends. (Figs. 30
	and 31)
(2)	Using a screwdriver, remove the terminal screw(s)
	on the terminal plate.
(3)	Using a ring connector fastener or pliers, securely
	clamp each stripped wire end with a ring connector.
	(Fig. 30)
(4)	Place the ring connector wire, and replace and
	tighten the removed terminal screw using a screw-

Special washer

Wire

Fig. 28

Strip 15/16" (25mm)	Solid wire
	Insulation
	Fig. 29
Strip 3/8" (10 mm)	Stranded wire

Fig. 30

Twist wire ends

Fig. 31

Screw

Ring connector

Terminal plate

Loop

Ring

connector

Screw and

special washer

Ring

connector

driver. (Fig. 32)

Wire

Fig. 32

14