Sanyo CE26LC81-B instruction manual Before Switching On Your TV, Switching The TV ON/OFF

Before Switching On Your TV

Power Connection

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz.

•After unpacking, allow the TV set to reach the ambi- ent room temperature before you connect the set to the mains.

Connections To The Aerial Input Socket

•Connect the aerial or cable TV plug to the Aerial input socket located at the rear of the TV and connect the cable plug coming out from the TV out socket lo- cated on the devices (VCR, DVB etc.) to this socket as well.

75

VHF/UHF CABLE TV

REAR OF THE TV

Inserting Batteries In The Remote Control Handset

WARNING : Remote control is battery included. A plas- tic protector is used to disconnect the batteries in order to prevent the battery life from reducing. Please remove the plastic protector before the first use.

•Remove the battery cover located on the back of the handset by gently pulling backwards from the indi- cated part.

•Insert two AAA/R03 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.

Note: Remove the battery from remote control hand- set when it is not to be used for a long period. Other- wise it can be damaged due to any leakage of bat- tery.

Switching The TV ON/OFF

To switch the TV on:

Your TV will switch on in two steps:

1- Connect the power supply cord to the system. Press Power On/Off button.Then the TV switches itself to stand-by mode (Optional).

2- To switch on the TV from stand-by mode either:

Press a digit button on the remote control so that a programme number is selected, or Press the "-P/CH" or "P/CH+" button on the TV or press the “-P”or “P+” button on the remote control, so that last mode switched off is selected.

By either method the TV will switch on. When the TV is operated for the first time, the following screen appears:

Auto Program

Country

Language

TXT Language

PLEASE CHECK ANTENNA CABLE

AUTO. PROGRAMMING SYSTEM

Ok

UKCancel

By pressing “” or “ ” button, adjust the Country item and press “” to highlight “Language” item.

Use “” or “ ” button to set “Language”. Use “” or “” buttons to select “TXT Language” and set it

by using ” or “ ” buttons. Press “OK” button to continue:

For more information on this process, see “Install Menu” section.

To switch the TV off:

•Press the “ (stand-by)” button on the remote con- trol or On/Off switch on the TV, so the TV will switch to stand-by mode.

To power down the TV completely, press Power On/ Off button or unplug the power cord from the mains socket.

English - 5 -