Press / button to set the Child Lock on or off.When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons will not work. Hence, if one of these buttons is pressed, “Child Lock On” will be displayed on the screen when the Menu screen is not visible.
Language
By pressing / button, select Language.Use
/ button to select the language.
EXT2 Out
By pressing / select EXT2 Output.Use / button, to set
Audio.
Note: When TV Source is set to HDMI, HDMI Audio setting will be available among
Blue Background
You can set the TV to automatically change to a blue screen if the signal is weak or absent, or when there is no input from an external device.
The Blue Background feature can be turned on or off by pressing “
” / “ 
” button.
Menu Background
By pressing / button, select Menu Background. Transparency level is adjusted by pressing “
” / “ 
” button.
Menu Timeout
By pressing / button, select Menu Timeout.
Press 
” / “ 
” button to change menu timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
By pressing / button, select Teletext Language. Press “
” / “ 
” button to change Teletext Language
to West, East, Turk/Gre,Cyrillic, or Arabic.
Default Zoom
By pressing / button, select Default Zoom. You can set Default Zoom to Panoramic, 4:3, 14:9 Zoom or 16:9 by pressing / button.
Install Menu
INSTALL
Program Table
Program
Band
Channel
Colour System
Program Table
By pressing / button, select Program Table. Press “ 
” to display Program Table.
Program Table
P01 | BBC 1 | P11 | S 18 |
P02 | C 04 | P12 | S 29 |
P03 | C 05 | P13 | S 31 |
P04 | BBC 1 | P14 | S 33 |
P05 | CH 4 | P15 | S 34 |
P06 | BBC 2 | P16 | S 35 |
P07 | C 04 | P17 | S 36 |
P08 | C 07 | P18 | S 37 |
P09 | C 12 | P19 | S 40 |
P10 | C 15 | P20 | C 21 |
|
|
|
|
|
| Name | Insert |
|
| Delete | APS |
|
|
|
|
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically.
Name:
To change the name of a decided programme, select the programme and press the RED button.
The first letter of the selected name will be highlighted. Press / button to change that letter and “
” /
“
” button to select the other letters. By pressing the RED button, you can store the name.
English - 8 -
