Page
CAUTION
For the customers in Canada
CAUTION
Declaration of Conformity
Location
Avoiding Electrical Shock and Fire
SERVICE
BEFORE USE
Care
When not in use for an extended period of time
Backup battery
MENU button
Symbols used in this manual
CONTENTS
4. RECORDER MENU
4. SPECIFICATIONS
APPENDIX
CONTROL TERMINAL
INTERFACE SPECIFICATIONS
1.MAIN FEATURES
2. ACCESSORIES
3. NAMES AND FUNCTIONS OF PARTS
19. USB port ( P.27, P.63)
20. [REC/STOP] button and indicator
21. LOCK/REMOTE indicator ( P.26, P.58)
Rear panel
FAN
4. INSTALLATION AND CONNECTIONS
Connecting to a network
Connecting the power
When you have finished making all the other
connections, insert the power plug into the
wall outlet
Securing the power cord
1. ADJUSTING THE DISPLAY
Displayed symbols
Changing the position of the operation display
Press the [EXIT/OSD] button repeatedly
Displaying four screens in sequence automatically
To switch screens automatically, displaying each single screen in sequence
1 Press the [QUAD/SEQUENCE] button
To return to the quad screen
2 Press the [QUAD/SEQUENCE] button
Displaying the image from a specified channel in a single screen
1 Press the desired [CHANNEL] button
2. RECORDING
Recording with the timer (timer recording)
1 Press the [TIMER] button
To stop during timer recording
2 Press the [TIMER] button
Recording upon alarm detection
Setting alarm recording
When an alarm input is detected
Ending alarm recording
3. PLAYING BACK VIDEOS
To change the fast-rewindspeed
Press the [] button while rewinding
To end fast-forward/rewind
To resume playback
2 Press the [STILL] button
Switching audio channels
Press the [AUDIO] button
During recording
During playback
4. SEARCHING FOR RECORDED VIDEOS
Select “ALARM SEARCH”, and press
the [ ] button
Press the [ ] or [ ] button to select
the image to play back
4 Press the [ ] button
Enter the alarm number of the desired
3 Press the
video
Date and time search
Press the [SEARCH] button while the
Press the [ ] button, and set the date
] button to select “VIEW”
and time to search
then press the [ ] button
Example: To search for the video from
5. PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION)
Setting the key lock function
Releasing the key lock function
With the key lock function set, hold down the [] button for about 3 seconds
6. COPYING RECORDED VIDEOS TO EXTERNAL MEDIA
Press the [ ] and [ ] buttons to select
“COPY SET” and press the [ ] button
Press the [ ] and
] buttons to
specify “START TIME” and “END TIME”
Formatting a CompactFlash card or CD-RW
“YES” and press the [ ] button
SETTINGS
1. MENU CONFIGURATION
Restoring items to the default settings
Display the setting screen you want to
restore
Press the [MENU RESET] button
Overview of settings
8. POWER LOSS/USED TIME ( P.62)
9. MENU UPLOAD/DOWNLOAD ( P.63)
2. SETTING THE LANGUAGE AND TIME
Setting the time
Example: Setting May 10, 2004, 8:30
Press the [ ] or [ ] button to move
the cursor to the date and time under
<CLOCK SET
“MODE” under <DAYLIGHT SAVING
When “USE” is selected for “MODE” under
<DAYLIGHT SAVING
] or [ ] button to change
the setting
the desired day of the week, then press
Use a cable to connect the CLOCK ADJ
OUT terminal on the rear panel of one
digital video recorder to the CLOCK
ADJ IN terminal on the second digital
the desired time, then press the [ ]
After you are finished chaging the
settings, press the [EXIT/OSD] button
Repeat steps 2 to 5 to set the time on
the second digital video recorder
3. SCREEN SET MENU
MOTION SENSOR SET
MONITOR SET
Press the [MENU] button
Select “2. SCREEN SET MENU”, and
press the [ ] button
Naming the cameras
Select “2. SCREEN SET MENU”, and
Select “2. TITLE SET”, and press the
[ ] button
Press the desired [CHANNEL] button to
Setting the motion sensor
Select “3. MOTION SENSOR SET”, and
“LEVEL,” then press the [ ] or [ ]
button to set the sensitivity
] or [ ] button to select a
sensor operation position, then press
the [ ] or
] button to set the
selection (you can set up to
4. RECORDER MENU
Press the [ ] or [ ] button to change
To reset the DNR when the FULL indicator lights
“DISK FULL RESET”, then press the
“YES”, then press the [ ] button
Alarm recording settings
“2. ALARM REC MODE SET”, then
press the
Setting the audio level
Select “3. RECORDER MENU”, and
“3. AUDIO REC LEVEL SET”, then press
Select the channel and change the
audio level
Recording every day, at the same time, with the same image quality
Select “4. TIMER REC SET” and press
“SUN” to “DLY”
Press the [ ] button to move the
cursor to the next item
To cancel all timer recording settings
Select “4. TIMER REC SET”, and press
4 With the <TIMER REC SET> screen displayed, press the [MENU RESET] button
To set timer recordings spanning more than 24 hours
] or [ ] button to move
Set the items in the “WEEK” and
“START” columns
the “STOP” time from “--:--”to “**:**”
Setting holidays
Set the end “WEEK” and “STOP” time
4 Set the month and day for item No
After entering the setting, press the [ ]
Initializing the hard disk/adding a hard disk
To initialize the hard disk
3 Press the [] or [] button to select
6 Press the [EXIT/OSD] button
To add a hard disk
[Setting conditions]
5. DISPLAY SET
6. BUZZER SET
7. SECURITY LOCK SET
Select “6. SECURITY LOCK SET”, and
setting, press the [ ] button
] and [ ] buttons to select
the character to enter
Repeat steps 4 to 5 to enter the
Setting the user password
the cursor to “USER”
When you have finished making the
“ON”, then press the [ ] button
Setting the password for recording and playback operations
Preventing copying to CD-R/RWsand CompactFlash cards
Setting the security lock
With the normal monitoring screen
displayed, press the
] button for
8. RS-485/NETWORKSET
Select “7. RS-485/NETWORKSET”, and
Press the [ ] button, then press the
[ ] or [ ] button to select “MANUAL”
Set “DVR NAME”, “IP ADDRESS”, and
“SUB NET MASK” using the [ ], [ ]
RS-485connections and settings
] and
change the setting, then press the [ ]
Repeat steps 3 to 4 to set the other
items as needed
9. POWER LOSS/USED TIME
10. MENU UPLOAD/DOWNLOAD
To save settings to a CompactFlash card
To load settings from a CompactFlash card
“SAVE MENUS TO CF”, then press the
“LOAD MENUS FROM CF”, then press
To format CompactFlash cards
To exit
APPENDIX
1. CONTROL TERMINAL SPECIFICATIONS
Page
2. RS-485SPECIFICATIONS
3. INTERFACE SPECIFICATIONS
4. SPECIFICATIONS
Dimensions
Cautions when adding a hard disk
Before installation
During installation
After installation
Bottom of the screen
Operation display off 
