Sanyo DSR-M814 To add a hard disk, [Setting conditions], 4 Press the [ ] button, 6 Press the [EXIT/OSD] button, “YES”, then press the [ ] button

e00_VDH_M814.book Page 52 Thursday, October 28, 2004 9:59 AM

4 Press the [ ] button.

The <WARNING> screen is displayed, with “NO” flashing.

RECORDER MENU

zPlayback disk

When mirroring is set, the digital video recorder automatically sets which of the two hard disks to read the recorded image from.

5	Press the [ ] or [ ] button to select
	“YES”, then press the [ ] button.

The “HDD INITIALIZING!” screen is displayed, and the hard disk is initialized.

When the process has finished, the display returns to the MENU screen.

SETTINGS

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

To add a hard disk

To add a hard disk, contact a Sanyo service center. When adding a hard disk, use an add-on type hard disk unit (sold separately).

[Setting conditions]

After adding a hard disk, a message appears at the next startup, confirming whether you want to initialize the newly installed hard disk. Select “Yes” to initialize the hard disk. If you select “No”, the hard disk cannot be used.

Hard disk setting screen

zMIRRORING

After adding a hard disk, you can record the same images on both hard disks by setting “MIRRORING” to “ON”. If an image write error occurs on one disk, you will still be able to read the image from the other disk.

52