Manuals / Brands / TV and Video / DVR / Sanyo / TV and Video / DVR

Sanyo DSR-M814 Ending alarm recording

1 73

Download 73 pages, 3.36 Mb

e00_VDH_M814.book Page 18 Thursday, October 28, 2004 9:59 AM

Ending alarm recording

When the alarm duration time (default setting: 20 seconds) ends, “AL” disappears from the operation display, the ALARM indicator stops flashing, and recording stops.

zWhen the hard disk’s remaining space for recording reaches zero, the FULL indicator lights and recording stops. You can start recording from the beginning again

by changing the recording setting. ( P.44)

zAlarm recording is taken at the [PICTURE QUALITY] setting made in [3.RECORDER MENU]>[1.REC MODE SET]. ( P.43)

The following restrictions apply to alarm recording.

(1)After recording starts (Standby→REC/STOP indicator lights).

(2)After making “PICTURE QUALITY” or “AUDIO RECORDING” menu settings and returning to the camera screen.

For (1) and (2):

z Alarm input is not recognized for a maximum of 4 seconds. Alarm input after the 4 seconds are recognized as usual.

z Recording does not start for a maximum of 6 seconds regardless of alarm input.

(3)After recording finishes (the REC/STOP indicator turns off).

z Alarm input is not recognized for a maximum of 5 seconds. Alarm input after the 5 seconds are recognized as usual.

z Recording does not start for a maximum of 10 seconds regardless of alarm input.

RECORDING

OPERATION

18

Contents

Page CAUTION For the customers in Canada CAUTION Declaration of Conformity Location Avoiding Electrical Shock and Fire SERVICE BEFORE USE Care When not in use for an extended period of time Backup battery MENU button Symbols used in this manual CONTENTS 4. RECORDER MENU 4. SPECIFICATIONS APPENDIX CONTROL TERMINAL INTERFACE SPECIFICATIONS 1.MAIN FEATURES 2. ACCESSORIES 3. NAMES AND FUNCTIONS OF PARTS 19. USB port ( P.27, P.63) 20. [REC/STOP] button and indicator 21. LOCK/REMOTE indicator ( P.26, P.58) Rear panel FAN 4. INSTALLATION AND CONNECTIONS Connecting to a network Connecting the power When you have finished making all the other connections, insert the power plug into the wall outlet Securing the power cord 1. ADJUSTING THE DISPLAY Displayed symbols Changing the position of the operation display Press the [EXIT/OSD] button repeatedly Displaying four screens in sequence automatically To switch screens automatically, displaying each single screen in sequence 1 Press the [QUAD/SEQUENCE] button To return to the quad screen 2 Press the [QUAD/SEQUENCE] button Displaying the image from a specified channel in a single screen 1 Press the desired [CHANNEL] button 2. RECORDING Recording with the timer (timer recording) 1 Press the [TIMER] button To stop during timer recording 2 Press the [TIMER] button Recording upon alarm detection Setting alarm recording When an alarm input is detected Ending alarm recording 3. PLAYING BACK VIDEOS To change the fast-rewindspeed Press the [] button while rewinding To end fast-forward/rewind To resume playback 2 Press the [STILL] button Switching audio channels Press the [AUDIO] button During recording During playback 4. SEARCHING FOR RECORDED VIDEOS Select “ALARM SEARCH”, and press the [ ] button Press the [ ] or [ ] button to select the image to play back 4 Press the [ ] button Enter the alarm number of the desired 3 Press the video Date and time search Press the [SEARCH] button while the Press the [ ] button, and set the date ] button to select “VIEW” and time to search then press the [ ] button Example: To search for the video from 5. PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION) Setting the key lock function Releasing the key lock function With the key lock function set, hold down the [] button for about 3 seconds 6. COPYING RECORDED VIDEOS TO EXTERNAL MEDIA Press the [ ] and [ ] buttons to select “COPY SET” and press the [ ] button Press the [ ] and ] buttons to specify “START TIME” and “END TIME” Formatting a CompactFlash card or CD-RW “YES” and press the [ ] button SETTINGS 1. MENU CONFIGURATION Restoring items to the default settings Display the setting screen you want to restore Press the [MENU RESET] button Overview of settings 8. POWER LOSS/USED TIME ( P.62) 9. MENU UPLOAD/DOWNLOAD ( P.63) 2. SETTING THE LANGUAGE AND TIME Setting the time Example: Setting May 10, 2004, 8:30 Press the [ ] or [ ] button to move the cursor to the date and time under <CLOCK SET “MODE” under <DAYLIGHT SAVING When “USE” is selected for “MODE” under <DAYLIGHT SAVING ] or [ ] button to change the setting the desired day of the week, then press Use a cable to connect the CLOCK ADJ OUT terminal on the rear panel of one digital video recorder to the CLOCK ADJ IN terminal on the second digital the desired time, then press the [ ] After you are finished chaging the settings, press the [EXIT/OSD] button Repeat steps 2 to 5 to set the time on the second digital video recorder 3. SCREEN SET MENU MOTION SENSOR SET MONITOR SET Press the [MENU] button Select “2. SCREEN SET MENU”, and press the [ ] button Naming the cameras Select “2. SCREEN SET MENU”, and Select “2. TITLE SET”, and press the [ ] button Press the desired [CHANNEL] button to Setting the motion sensor Select “3. MOTION SENSOR SET”, and “LEVEL,” then press the [ ] or [ ] button to set the sensitivity ] or [ ] button to select a sensor operation position, then press the [ ] or ] button to set the selection (you can set up to 4. RECORDER MENU Press the [ ] or [ ] button to change To reset the DNR when the FULL indicator lights “DISK FULL RESET”, then press the “YES”, then press the [ ] button Alarm recording settings “2. ALARM REC MODE SET”, then press the Setting the audio level Select “3. RECORDER MENU”, and “3. AUDIO REC LEVEL SET”, then press Select the channel and change the audio level Recording every day, at the same time, with the same image quality Select “4. TIMER REC SET” and press “SUN” to “DLY” Press the [ ] button to move the cursor to the next item To cancel all timer recording settings Select “4. TIMER REC SET”, and press 4 With the <TIMER REC SET> screen displayed, press the [MENU RESET] button To set timer recordings spanning more than 24 hours ] or [ ] button to move Set the items in the “WEEK” and “START” columns the “STOP” time from “--:--”to “**:**” Setting holidays Set the end “WEEK” and “STOP” time 4 Set the month and day for item No After entering the setting, press the [ ] Initializing the hard disk/adding a hard disk To initialize the hard disk 3 Press the [] or [] button to select 6 Press the [EXIT/OSD] button To add a hard disk [Setting conditions] 5. DISPLAY SET 6. BUZZER SET 7. SECURITY LOCK SET Select “6. SECURITY LOCK SET”, and setting, press the [ ] button ] and [ ] buttons to select the character to enter Repeat steps 4 to 5 to enter the Setting the user password the cursor to “USER” When you have finished making the “ON”, then press the [ ] button Setting the password for recording and playback operations Preventing copying to CD-R/RWsand CompactFlash cards Setting the security lock With the normal monitoring screen displayed, press the ] button for 8. RS-485/NETWORKSET Select “7. RS-485/NETWORKSET”, and Press the [ ] button, then press the [ ] or [ ] button to select “MANUAL” Set “DVR NAME”, “IP ADDRESS”, and “SUB NET MASK” using the [ ], [ ] RS-485connections and settings ] and change the setting, then press the [ ] Repeat steps 3 to 4 to set the other items as needed 9. POWER LOSS/USED TIME 10. MENU UPLOAD/DOWNLOAD To save settings to a CompactFlash card To load settings from a CompactFlash card “SAVE MENUS TO CF”, then press the “LOAD MENUS FROM CF”, then press To format CompactFlash cards To exit APPENDIX 1. CONTROL TERMINAL SPECIFICATIONS Page 2. RS-485SPECIFICATIONS 3. INTERFACE SPECIFICATIONS 4. SPECIFICATIONS Dimensions Cautions when adding a hard disk Before installation During installation After installation