Sanyo DSR-M814 button, ] button, ] button, ] button, Press the, Press the, Press the, Press the, Press the, the setting, <DAYLIGHT SAVING, ] or [ ] button to change

e00_VDH_M814.book Page 35 Thursday, October 28, 2004 9:59 AM

SETTING THE LANGUAGE AND TIME

3	Press the [ ] or [ ] button to select
	“MODE” under <DAYLIGHT SAVING>.

4 Press the [ ] button. “USE” flashes.

When “USE” is selected for “MODE” under<DAYLIGHT SAVING>

You can set the date and time at which the time is switched from standard time to Daylight Saving time, and the date and time at which the time is switched back again.

The example below is the default value.

Example:

After the clock display reaches April 4, 2004, 01:59, the next clock display is 03:00, putting the clock an hour ahead (Daylight Saving time).

After the clock display reaches October 31, 2004, 01:59, the next clock display is 01:00, putting the clock

an hour behind (back to standard time).
(1)	(2)	(3)	(4)

SETTINGS
5		Press the [		] or [ ] button to change
		the setting.
	Settings (‹ indicates default setting.)
		Setting		Description
	‹USE		Time is automatically adjusted to
			Daylight Saving time.
		NO USE	Time is not automatically adjusted to
			Daylight Saving time.
6		Press the [		] button.

The cursor moves to the date time at which to switch from standard time to Daylight Saving time.

35

(5) (6) (7) (8)

(1)Sets the week for switching to Daylight Saving time.

(2)Sets the day of the week.

(3)Sets the month.

(4)Sets the time.

(5)Sets the week for ending Daylight Saving time.

(6)Sets the day of the week.

(7)Sets the month.

(8)Sets the time.

7	Press the [	] button.
	The cursor moves to “1ST”.
8	Press the [	] or [ ] button to select
	the desired week, then press the [ ]

button.