TEMPERATURE SETTING
Chamber temperature
Table 1 shows the basic procedure for setting the chamber temperature. Perform key operations in the sequence indicated in the table. The example in the table is based on the assumption that the desired temperature is
Note: The unit is set at the factory that the chamber temperature
Table 1. Basic operation sequence (Example: Chamber temperature -25oC)
| Description of operation | Key operated | Indication after operation | |
1 | Connect the power plug to | The current chamber temperature is | ||
exclusive power supply socket. | displayed. | |||
|
| |||
| TOP | Top compartment lamp lights and the | ||
2 | By pressing the compartment select | current chamber temperature of top | ||
BOTTOM | ||||
| key, select the top compartment. | compartment is displayed. | ||
|
| |||
3 | Press SET key. | SET | The second digit of the temperature | |
indicator flashes. | ||||
|
|
| ||
| Set the temperature to 25 with the |
| By pressing the key, settable digits | |
|
| moves. | ||
4 | digit shift key and the numeric |
| ||
| By pressing the key, the numerical value | |||
| value shift key. |
| ||
|
| of the settable digits increases. | ||
|
|
| ||
5 | Press SET key. | SET | When pressed, the figure of settable | |
digit increases. | ||||
| By pressing the compartment select |
| ||
| TOP | Set temperature is memorized and the | ||
6 | key, select the bottom | |||
BOTTOM | current chamber temperature is displayed. | |||
| compartment. | |||
|
|
| ||
|
|
| ||
7 | Perform the same operation as in the case of steps | The chamber temperature setting is stored, and the | ||
3 to 5, and set the temperature for the bottom | current chamber temperature is displayed. | |||
| ||||
| compartment. |
|
|
Note:
Although the value of the chamber temperature setting can range from
Note that defrosting of this unit is started manually (by pressing the DEF key for about 5 seconds) and stopped manually.
19