Sanyo MDF-U7486SC, MDF-U5486SC instruction manual Alarm Temperature Setting

ALARM TEMPERATURE SETTING

This unit is provided with the high and low temperature alarm and the temperature at which the alarm is activated is changeable.

The following procedure shows the setting of alarm temperature according to the condition below: High temperature alarm: activates at the temperature 5oC higher than the set temperature Low temperature alarm: activates at the temperature 5oC lower than the set temperature

Note:

The alarm temperature is set at the factory 10oC higher and lower than the set temperature.

The available range of alarm temperature is between 5oC and 40oC higher or lower than the set temperature.

Table 3. Procedure for setting high temperature alarm

	Description of operation	Key operated	Indication after operation
1		----	The current chamber temperature is
			displayed.
	Press numerical value shift key for
2			The first digit is flashed.
	about 5 seconds.
3	Press numerical value shift key		The first digit is flashed.
	and scroll the figure to 1.
4	Press set key.	SET	The first digit is flashed.
	Scroll the figure to 005 by using		When pressed, the figure of settable
			digit changes.
5	digit shift key and numerical value
			When pressed, the changeable digit
	shift key.
			moves.
			Alarm temperature is memorized and
6	Press set key.	SET	the current chamber temperature is
			displayed.
Table 4. Procedure for setting low temperature alarm
	Description of operation	Key operated	Indication after operation
1		----	The current chamber temperature is
			displayed.
2	Press numerical value shift key for		The first digit is flashed.
	about 5 seconds.
	Press numerical value shift key
3			The first digit is flashed.
	and scroll the figure to 2.
4	Press set key.	SET	The first digit is flashed.
	Scroll the figure to -05 by using		When pressed, the figure of settable
			digit changes.
5	digit shift key and numerical value
			When pressed, the changeable digit
	shift key.
			moves.
			Alarm temperature is memorized and
6	Press set key.	SET	the current chamber temperature is
			displayed.

•The set mode returns to the temperature display mode automatically when 90 seconds has passed without any key operation. In this case, any setting before pressing set key (SET) is not memorized.

-57 -

15