JVC VN-C10 Alarm Setting Window, Alarm 1, On/Off, Alarm Out, Relay Alarm Setting, Momentum, Value

Operations (Step 6 Operations with a Web Browser)

6-4 Settings with a Web Browser (4. Alarm Settings)

Alarm Setting Window:

http://******/alarm-e.html (****** represents the URL of VN-C10.)

This section describes the setting of actions of VN-C10 when an alarm signal has been received.

			Click [Apply] to update the settings.
		Item	Effect
Alarm In			Specifies the action when an alarm signal has been received.
	Alarm 1 and 2		Specifies the action when an alarm signal has been input to
			[Alarm 1] and/or [Alarm 2].
		On/Off	Select [On] if the alarm terminals [Alarm 1] and/or [Alarm 2]
			are to be used. If not to be used, select [Off].
		Alarm Out	If [On] is selected here, alarm signals are output to the
			[ALARM OUTPUT] terminal located on the rear panel.
	Relay Alarm		Sets the relay alarm function, which is activated when two
			alarms are successively received within a certain period of
			time.
		On/Off	Select whether to enable or disable the relay alarm function.
		Relay Alarm Setting	Sets the sequence and interval of alarm input.
		Alarm Out	If [On] is selected here, alarm signals are output to the
			[ALARM OUTPUT] terminal located on the rear panel.
Alarm Out
	On/Off		Select [On] for alarm signals to be output to the [ALARM
			OUTPUT] terminal located on the rear panel.
	Momentum		Sets the duration for sending alarm output signals.
	Value		Sets whether to output high or low signals for alarm output.
	Power on Init		If [Yes] is selected, the alarm signal, which was set upon
			power connection, is output once.

Caution

•Perform the output setting appropriately according to the equipment to which signals are sent.

•When the alarm setting is complete, check whether the alarm functions are working prop- erly.

70