JVC VN-C10 manual Following screen is displayed for confirmation

2-4 Other Settings with V.Networks Setup Tool [1. Password Setting]

VN-C10 is equipped with an access protection (security) function that, by setting passwords, regulates users of the connected PC.

Setting and cancellation of passwords can be performed with [V.Networks Setup Tool].

According to access right (authorization) levels, up to 3 passwords (user, operator and administrator) can be set.

Access Right Level	Allowed Actions
User	Only viewing moving images
Operator	All operations with [V.Networks Controller]
Administrator	All of the above and all settings with [V.Networks Setup Tool]

Note

Do not forget the passwords as they cannot be changed unless the current, and correct ones are entered.

1. Start up [V.Networks Setup Tool] and select [User], [Operator] or [Administrator].

Enter a password to set password protec- tion or change the password. Entered char- acters are displayed as asterisks (*).

¥ Enter the same password for both boxes. ¥ A password must be alphanumeric and

can be up to 8 characters.

Note

To cancel an existing password, leave the password entry box blank

and click .

Click .

2.The following screen is displayed for confirmation.

Click .

Note

●For a password-protected VN-C10, the password request screen appears.

●VN-C10 cannot be set up unless the correct administrator password is entered.

●The security level is highest for the administrator and lowest for the user. If password is set only for lower security level(s), password protection is not effective.

27