JVC VN-C10 4-5Setting the Image Quality continued, 1Compression Rate, 2White Balance, 4Saturation

4-5 Setting the Image Quality (continued)

1Compression Rate

Sets the image compression rate. A lower compression rate means a higher image quality. However, with a reduced compression rate, data volume also increases.

This setting is not available for MPEG4. Value range: 1 to 7 (Set to Ò2Ó at the factory)

2White Balance

Auto	: Automatically adjusts the white
	balance, the standard for color
	saturation. Factory set.
R gain	: To manually adjust the white bal-
	ance toward more red intensity.
	Value range: 0 to100
B gain	: To manually adjust the white bal-
	ance toward more blue intensity.
	Value range: 0 to100

3Shutter Speed

1/60 : Normal speed. Factory set.

1/100 : This reduces image flickers due to fluorescent lighting in areas where the commercial power fre- quency is 50 Hz.

4Saturation

Adjusts color saturation. A smaller value makes colors less dense. Set to Ò25Ó at the factory

5AGC, AES, BLC

AGC	: Automatically adjusts the gain in
	accordance with the brightness.
	Factory Set.
AES	: Automatically adjusts the shutter
	speed in accordance with the
	brightness. Only for a manual iris
	lens.
BLC	: Back light compensation. When
	there is a bright light source in the
	background of the object, VN-C10
	adjusts the weighted zone.
	Photo-metering Area

Note

●AES cannot be turned on when AGC is set to [OFF].

●AES cannot be turned on if the shutter speed is set to [1/100].

●BLC cannot be turned on when AGC is set to [OFF].

●Do not use AES with a DC IRIS lens. It may cause flickering.

6Default

Returns all values, except that for iris level, for image quality to those set at the factory.

7Iris level

Brightness adjustment for a DC IRIS lens.

A smaller value makes images darker, closing the iris.

49