JVC VN-C10 manual For other settings, next page, Confirm the settings, Click

2-3 Setting the IP Address for VN-C10 with V.Networks Setup Tool (continued)

2. Confirm the settings.

For other settings, ☞ next page

3. Click .

Select whether to use DHCP.

Note

●With DHCP selected, the IP ad- dress of the DHCP server etc. can be checked.

Change the IP address to the one alloted, or approved, by the network administrator.

Set the subnet mask to an appropriate value according to the operating environ- ment. Ask the network administrator if nec- essary.

Click .

[V.Networks ID] works as an identifica- tion code set to VN-C10. Only alphanu- meric characters can be used. This ID does not directly affect the operation by the user. Normally, the ID should be set as ÒCAM00001,Ó ÒCAM00002Ó etc.

(0 to 8 characters)

Click to update the values.

Note

A new IP address becomes effective when VN-C10 is automatically reset.

4. Start up [V.Networks Controller]. (☞Page 42)

Note

In a system where more than one VN-C10 are used, turn on the power for a VN-C10 first and proceed the setting to 2-4 Other Settings with V.Networks Setup Tool. Only then turn on the power for a second one and go on to 2-4. Repeat the procedure for the other cameras.

25