JVC VN-C10 manual Preparations Connection and Installation, 1-1Attaching a Lens, PinPlug, 3 4 2

Preparations (Step 1 Connection and Installation)

1-1 Attaching a Lens

Attach a lens in the following procedure.

(a)F

(b)

2.

RESET		IRIS
1	3	3.

2 4

1. Before attaching a lens, check the mount method of the lens.

VN-C10 is set for CS-mount at the factory. For attaching a C-mount lens, loosen the back- focus locking screw using a screwdriver and turn the back-focus adjustment ring to change the mount method accordingly with a finger or a pointed tool like a screwdriver.

To attach a lens, observe the length shown as (a). Do not use a lens with a length longer than (a) as it may cause damage to the inter- nal parts of the camera and proper lens at- tachment would not be possible.

Lens	Flange-back distance (b)	Length (a)
C-mount lens	17.526mm	10 mm max.
CS-mount lens	12.5mm	5.5 mm max.

2. Attach the lens to the camera securely by turn-

ing it clockwise.

3. In the case of a DC IRIS lens, connect the

lens cable to the socket while examining the pin arrangement.

4-Pin Plug

1

3

4

2

Lens	DC IRIS Lens
Pin No.	(Without a built-in EE amplifier)
1	Damping d
2	Damping e
3	Driving e
4	Driving d

13