Preparations
Preparation Procedure
Set the camera in the following procedure.
Step 1 Connection and Installation
Attach a lens and connect the power cable, a LAN cable and an alarm etc. Then, install the camera to a fixer, etc. Fix a wire securely for preventing the camera from falling off.
Step 2 Setting the Network
Install the software [V.Networks Controller], and set the network for the PC and
☞Page 13
☞Page 19
❈If multiple PCs are in use, first turn on the power for one PC and proceed to
Step 3 Adjusting the Camera
Adjust the | ☞ Page 43 |
|
Step 4 Setting with V.Networks Controller
Set image quality and alarm, etc. by using [V.Networks Controller] which has been installed.
Step 5 Operations with V.Networks Controller
Now the camera is ready for recording and playback, etc. with [V.Networks Controller].
Step 6 Operations with a Web Browser
The camera is ready for Web operations.
☞Page 44
☞Page 55
☞Page 61
12