Sanyo PLC-WU3800 owner manual Installation Connecting to a Computer, Cables used for connection

Installation

Connecting to a Computer

Cables used for connection

•VGA cables (Mini D-sub 15 pin) *

•Audio cables

•HDMI-DVI cable

(*One cable is supplied; other cables are not supplied with the projector.)

	Monitor	Monitor Output /	DVI
Audio Output			Output
	Output	Monitor Input
			External Audio Equipment

VGA	VGA	HDMI-DVI
cable	cable	cable	Audio Input

Audio cable (stereo)

COMPUTER IN 1	COMPUTER IN 2 /	HDMI
COMPONENT	MONITOR OUT

This terminal is
switchable. Set up	Audio cable
the terminal as	(stereo)
COMPUTER IN 2 or
MONITOR OUT.(See
Page 51.)

AUDIO OUT (stereo)

COMPUTER 1 COMPONENT/

COMPUTER 2 AUDIO IN

PNote:

•Input sound to the COMPUTER1 COMPONENT/COMPUTER 2 AUDIO IN terminal when using the COMPUTER IN 1/ COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminal as input.

•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not the

COMPUTER IN 2.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

PNote:

•Analog RGB and component signals cannot be output from the COMPUTER IN 2/MONITOR OUT terminal when using the COMPUTER IN 2/MONITOR OUT terminal as output.

•When DVI signal is connected to HDMI terminal with HDMI-DVI cable, connect the sound signal to COMPUTER 2 AUDIO IN and set up Sound of "HDMI setup" to "Computer2". (p.51)

15