Basic Operation

Main Menu

For detailed functions of each menu, see “Menu Tree” on pages 71-72.

Main

Menu

Sub-Menu

 

 

 

 

 

 

 

 

j k l m n o p q

r s

jInput

Used to select an input source from Computer 1, Computer 2, HDMI, Video, or S-video(pp.28-29,38-39).

kPC adjust

Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format (p.31-33).

lImage select

For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.34).

For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , Colorboard and Image 1- 4 (p.41).

mImage adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (R/G/B), Sharpness and Gamma] (pp.35-36).

For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.42-43).

nScreen

For computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.36-37). For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.44).

oSound

Used to adjust the volume or mute the sound (p.25).

pSetting

Used to set the projector’s operating configurations (pp.45-60).

qInformation

Display the input source information: Input , H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.61).

rNetwork

See the owner’s manual of “Network Set-up and Operation”.

sGuide

The key operation is displayed.

23

Page 23
Image 23
Sanyo PLC-WU3800 owner manual Basic Operation Main Menu, For detailed functions of each menu, see Menu Tree on pages