Setting
Picture in Picture
This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen.
Use the Point ▲▼ buttons to select Picture in Picture and then press the SELECT button or the Point ► button to access the submenu.
Only the sound from the source of Main picture is valid, while the source of Sub picture cannot output the sound. ( In P in P, the larger picture is main picture, and the smaller one is sub picture; in P by P, the left picture is main picture, and the right one is sub picture.)
Mode
Select the Picture in Pictrue mode among P in P, P by P and Off
P in P : Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu.
P by P: Provide the images of Main picture and Sub picture at the ratio of 4:3.
Off : Turn off the Picture in Picture function.
Subpicture size
Press the Point ◄► buttons to change the Subpicture size among Small, Middle and Large.
Subpicture position
Adjust the Subpicture position.
Press the Point ◄► buttons to change the Subpicture position.
Selecting the sub picture
During Picture in Picture mode, and being undisplayed On Screen Menu, press the SELECT button to select Sub picture. (A red frame will be displayed on the selected picture.)
Switching Input Source
When Main picture or Sub picture is selected, input source can be set by pressing the INPUT button on the top control or COMPUTER1/2 or HDMI buttons on the remote control.
Picture in Picture
PNote:
•The Picture in Picture function is not available depending on the input signals and the selected input terminals. Refer to List of Picture in Picture for details. (p.76)
•When the input signal(s) is/are incompatible,
mark will be displayed on the Main/Sub picture.
•Subpicture size and Subpicture position works only under P in P mode.
52
