Video Input
Input Source Selection (Component, RGB Scart
Direct Operation
Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER 1 button on the remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
| COMPUTER 1 button |
HDMI | Computer 1 (RGB) |
Computer 1 (Scart)
HDMI button
HDMI
COMPONENT button
Computer 1
(Component)
⁄COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1 | Press the MENU button to display the | |
| Menu. Use the Point ▲▼ buttons to select Input and | |
| then press the Point ► or the SELECT button. | |
2 | Use the Point ▲▼ buttons to select Computer 1 and | |
| then press the Point ► button; use the Point ▲▼ buttons | |
| to select HDMI, and then press the SELECT button. | |
3 | When Computer 1 is selected, use the Point ▲▼ | |
| buttons to select Component or RGB(Scart) and then | |
| press the SELECT button. | |
| When the input source is coming from video | |
Component | ||
|
| equipment connected to the COMPUTER |
|
| |
|
| IN 1/COMPONENT IN terminal with a |
|
| |
Top Control
Input Menu
INPUT button 
Computer 1
Computer 2 ⁄
HDMI
Video
RGB (Scart)
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).
HDMI
PNote:
When the video signal is connected to the HDMI terminal, select HDMI.
•When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.46).
39
