Installation

Connecting to a Computer

Cables used for connection

VGA cables (Mini D-sub 15 pin) *

Audio cables

HDMI-DVI cable

(*One cable is supplied; other cables are not supplied with the projector.)

Monitor Output

Audio Output Monitor Output /Monitor Input DVI output

External Audio Equipment

VGA cable

Audio cable (stereo)

VGA cable

HDMI-DVI cable

Audio Input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMPUTER IN 1 /

COMPUTER IN 2 HDMI

COMPONENT IN

/ MONITOR OUT

Audio cable (stereo)

AUDIO OUT (stereo)

COMPUTER 1 /

COMPUTER 2

AUDIO IN

Note:

Input sound to the COMPUTER1 /COMPUTER 2 AUDIO IN terminal when using the COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.

When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN 2.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Note:

Analog RGB and component signals cannot be output from the COMPUTER IN 2/MONITOR OUT terminal when using the COMPUTER IN 2/MONITOR OUT terminal as output.

When DVI signal is connected to HDMI terminal with HDMI-DVI cable, connect the sound signal to COMPUTER 2 AUDIO IN and set up Sound of "HDMI setup" to "Computer2". (p.50)

14

Page 14
Image 14
Sanyo PLC-WXU300K owner manual Installation Connecting to a Computer, Cables used for connection