Sanyo PLC-XE34 owner manual Basic Operation Menu Bar, Computer, Video, Main Menu, Sub-Menu

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 68-69.

	Main Menu		Sub-Menu
		►
①			Computer 1	RGB
			Computer 2	RGB
②			Video

③

④

⑤

⑥

⑦

⑧

⑨

⑩

①Input

Used to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).

②PC adjust

Select Auto PC adj.., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area-H and Display area-V to adjust the parameters to match with the PC input signal format (pp.29-31).

③Image select

For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.32).

For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard and Image 1- 4 (p.39).

④Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (R/G/B), Sharpness and Gamma] (pp.33-34).

For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (R/G/ B), Sharpness, Gamma, Noise reduction and Progressive] (pp.40-41).

⑤Screen

For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom, Custom adj. and Digital zoom +/– ] (pp.34-35).

For Video source, used to set size of image [Normal, Wide, Custom and Custom adj.] (p.42).

⑥Sound

Used to adjust the volume or mute the sound (p.24).

⑦Setting

Used to set the projector’s operating configurations (pp.43-57).

⑧Information

Display the input source information: Input , H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter , Power management, Key lock, PIN code lock and Remote control (p.58).

⑨Network

See the owner’s manual of “Network Set-up and Operation”.

⑩Guide

The key operation is displayed.

22