Sanyo PLC-XE34 Video Input Video System Selection, AV System Menu Video or S-video, Auto

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen	AV System Menu (Video or S-video)
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Select Video, S-video or Computer 1(Component)
	input source. (See pages 36-37)
3	Use the Point ▲▼ buttons to select System and then
	press the Point ► or the SELECT button. Use the Point

▲▼ buttons to select the desired system and then press the SELECT button.

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43, PAL-M, and PAL-N.

Component	AV System Menu (Component)
Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

►

✔Note:

The AV System Menu cannot be selected when selecting

RGB (Scart).

38